Configuracion del servidor smtp del iis
Moderador: Moderadores
Configuracion del servidor smtp del iis
Hola me gustaria saber como tengo que configurar el servidor smtp del iis para que me permita mandar correo a traves de mi propio equipo, sin tener que indicar un servidor smtp externo. Por favor es urgente!!! gracias
Te cuento, tengo una conexion ADSL con router, el cual tiene una direccion publica fija. He conseguido hacer algo con el servidor smtp pero al probar y mandarme un mensaje de prueba me da el siguiente error:
"El mensaje no se pudo enviar, uno de los destinatarios fue rechazado por el servidor. Su dirección de correo electrónico es "direccion@telefonica.net". Asunto 'aslfdj', Cuenta: 'Personal', Servidor: 'local.com', Protocolo: SMTP, Respuesta del servidor: '550 5.7.1 <direccion@telefonica.net>... Relaying denied', Puerto: 25, Seguridad (SSL): No, Error de servidor: 550, Número de error: 0x800CCC79"
Me imagino que sera algo de la seguridad saliente, algo de la autenticacion basica, integrada o algo de eso. A ver si me puedes orientar. Gracias
"El mensaje no se pudo enviar, uno de los destinatarios fue rechazado por el servidor. Su dirección de correo electrónico es "direccion@telefonica.net". Asunto 'aslfdj', Cuenta: 'Personal', Servidor: 'local.com', Protocolo: SMTP, Respuesta del servidor: '550 5.7.1 <direccion@telefonica.net>... Relaying denied', Puerto: 25, Seguridad (SSL): No, Error de servidor: 550, Número de error: 0x800CCC79"
Me imagino que sera algo de la seguridad saliente, algo de la autenticacion basica, integrada o algo de eso. A ver si me puedes orientar. Gracias
-
Victek
- Senior
- Mensajes: 104
- Registrado: Lun Mar 22, 2004 7:59 pm
- Ubicación: Barcelona, España
- Contactar:
Más información sobre tu error 550. Espero que te sirva, yo trabajo con el PCAccessPlus.
Introduction
Error 550 can occur when you e-mail MLS listings using the E-mail Message window and any one of the following are true:
You entered an invalid e-mail address in the E-mail Message window.
You entered an incorrect SMTP mail server name in the E-mail Setup window, or IIs cannot access your SMTP mail server.
If you use more than one ISP on the computer that you run IIs from, you many see the 550 - Mail Relaying Denied error message.
To determine which of the above problems is causing Error 550, follow the steps in: How to Correct Error 550.
--------------------------------------------------------------------------------
How to Correct Error 550
There are three possible causes of Error 550. Follow the procedure beginning with Invalid E-Mail Address to determine the cause of your Error 550 and correct it.
Invalid E-mail Address
If you enter an invalid e-mail address in the E-mail To: field on the E-mail Message window, this may cause your ISP's SMTP mail server to display Error 550. To correct this error:
Enter a valid e-mail address in the E-mail To: field on the E-mail Message window.
Send your e-mail message.
Note: If you are able to send your e-mail message, see step 3 for instructions on removing an invalid e-mail address from your MAIL.HST file.
If you entered a valid e-mail address and your ISP's SMTP mail server continues to display Error 550, you need to verify your SMTP mail server name.
PC Access stores the last thirty e-mail address you entered in the E-mail To: field in the MAIL.HST file.
To edit the MAIL.HST file, click Start | Programs | Accessories | Notepad.
In Windows Notepad, click File | Open....
In the Look in field, select your C: drive, then your PC Access for Windows folder, then your Agent directory.
Note: If you installed PC Access for Windows to a drive other than C:, substitute the name of that drive in the instructions above.
From the Files of type: drop-down window, select All Files.
Click the MAIL.HST file and click Open.
Remove the invalid e-mail address from the MAIL.HST file.
Click File | Save.
Click File | Exit.
Verify Your SMTP Mail Server Name
From the PC Access Main Menu, click E-Mail.
Click Setup on the E-mail Message Window.
On the E-mail Setup Menu window, make sure that you entered the correct SMTP mail server name next to My Internet Mail Server.
Note: If you do not know what your SMTP mail server name is, contact your ISP.
Connect to your MLS and send E-mail. If you continue to receive Error 550, see Mail Relaying Denied.
Mail Relaying Denied
If you use more than one ISP on the computer that you run PC Access from, you may see the 550 - Mail Relaying Denied error message.
This problem can occur when you enter one ISP's SMTP mail server name in the My Internet Mail Server field on the E-mail Setup Menu window, but you connect to the Internet using another ISP.
Note: Most ISPs only allow you to send e-mail through their SMTP mail server when you connect to the Internet through their service. In other words, you cannot connect to the Internet through one ISP and send mail through a different ISP's SMTP mail server.
To correct the 550 - Mail Relaying Denied error, connect to the Internet through the same ISP that you specified in the My Internet Mail Server field in the E-mail Setup Menu window.
Introduction
Error 550 can occur when you e-mail MLS listings using the E-mail Message window and any one of the following are true:
You entered an invalid e-mail address in the E-mail Message window.
You entered an incorrect SMTP mail server name in the E-mail Setup window, or IIs cannot access your SMTP mail server.
If you use more than one ISP on the computer that you run IIs from, you many see the 550 - Mail Relaying Denied error message.
To determine which of the above problems is causing Error 550, follow the steps in: How to Correct Error 550.
--------------------------------------------------------------------------------
How to Correct Error 550
There are three possible causes of Error 550. Follow the procedure beginning with Invalid E-Mail Address to determine the cause of your Error 550 and correct it.
Invalid E-mail Address
If you enter an invalid e-mail address in the E-mail To: field on the E-mail Message window, this may cause your ISP's SMTP mail server to display Error 550. To correct this error:
Enter a valid e-mail address in the E-mail To: field on the E-mail Message window.
Send your e-mail message.
Note: If you are able to send your e-mail message, see step 3 for instructions on removing an invalid e-mail address from your MAIL.HST file.
If you entered a valid e-mail address and your ISP's SMTP mail server continues to display Error 550, you need to verify your SMTP mail server name.
PC Access stores the last thirty e-mail address you entered in the E-mail To: field in the MAIL.HST file.
To edit the MAIL.HST file, click Start | Programs | Accessories | Notepad.
In Windows Notepad, click File | Open....
In the Look in field, select your C: drive, then your PC Access for Windows folder, then your Agent directory.
Note: If you installed PC Access for Windows to a drive other than C:, substitute the name of that drive in the instructions above.
From the Files of type: drop-down window, select All Files.
Click the MAIL.HST file and click Open.
Remove the invalid e-mail address from the MAIL.HST file.
Click File | Save.
Click File | Exit.
Verify Your SMTP Mail Server Name
From the PC Access Main Menu, click E-Mail.
Click Setup on the E-mail Message Window.
On the E-mail Setup Menu window, make sure that you entered the correct SMTP mail server name next to My Internet Mail Server.
Note: If you do not know what your SMTP mail server name is, contact your ISP.
Connect to your MLS and send E-mail. If you continue to receive Error 550, see Mail Relaying Denied.
Mail Relaying Denied
If you use more than one ISP on the computer that you run PC Access from, you may see the 550 - Mail Relaying Denied error message.
This problem can occur when you enter one ISP's SMTP mail server name in the My Internet Mail Server field on the E-mail Setup Menu window, but you connect to the Internet using another ISP.
Note: Most ISPs only allow you to send e-mail through their SMTP mail server when you connect to the Internet through their service. In other words, you cannot connect to the Internet through one ISP and send mail through a different ISP's SMTP mail server.
To correct the 550 - Mail Relaying Denied error, connect to the Internet through the same ISP that you specified in the My Internet Mail Server field in the E-mail Setup Menu window.
Si que tengo abierto el puerto 25, que es el de SMTP, ademas lo he redireccionado hacia la IP de mi ordenador. El articulo que me has puesto no me ha dicho nada que no supiese. De todas formas ya he conseguido solucionar mi problema de otra manera: Yo queria un servidor SMTP propio pq tengo una aplicacion ASP con registro de usuarios a una base de datos personal. Dicha aplicacion la tengo alojada en mi ordenador, que hace las veces de servidor web. Al registrarse los usuarios les mando de manera automatica una respuesta con sus datos de acceso al servidor. Mi problema era que al enviar los datos de acceso mediante mi servidor SMTP habitual (smtp.telefonica.net), dichos datos no llegaban a los usuarios que no fuesen de telefonica (todo por la politica antispam). Por ello queria hacerme mi propio servidor SMTP, para enviar correos a quien me diese la gana y cuando me diese la gana. Como el servidor SMTP de Internet Information server me ha sido imposible de configurar, me he instalado ArgoSoft Mail Server, que va muy bien y me sirve para lo que buscaba. No obstante si alguien sabe como configurar a fondo el servidor SMTP de IIS, que me enseñe a hacerlo ya que me he quedado con la curiosidad. Gracias.