Ema escribió:Tengo windows XP y sucede que algunos programas no se pueden ejecutar, mientras que en otras computadoras si.
El mensaje que aparece dice:
"Subsistema de Windowa sw 16 bits
C:\WINDOWS\SYSTEM32\AUTOEXEC.NT. El archivo no es apropiado para ejecutar aplicaciones MS-DOS y Windows. Elija "cerrar" para finalizar la aplicación."
Si alguien me puede ayudar con esto le agradesco de antemano.
A ver si esto te ayuda:
"it's because one of the following files is missing from \WINNT\System32:
* Config.nt
* Autoexec.nt
* Command.com
Check to see that these files are there. If not, expand them from the install CD and copy them to \WINNT\System32
They'll be in the \I386 folder as
Config.nt_
autoexec.nt_
command.co_
From a command prompt window, type
Expand /?
to get instructions for using Expand"
en la web de Microsoft dicen que hagas esto (Lo siento, tambien esta en Ingles, pero no te preocupes: creo que todo se solucionatra si re-intalas Windows encima, o sea , sin borrar nada):
"RESOLUTION
To resolve this issue:
1. Insert the CD into the CD drive or DVD drive.
2. Click Start, and then click Run.
3. In the Open box, type cmd, and then click OK.
4. At the command prompt, type the following commands, pressing ENTER after each command:
expand CD-ROM Drive Letter:\i386\config.nt_ c:\windows\system32\config.nt
expand CD-ROM Drive Letter:\i386\autoexec.nt_ c:\windows\system32\autoexec.nt
expand CD-ROM Drive Letter:\i386\command.co_ c:\windows\system32\command.com
exit
5. Start or install the program. If the issue is resolved, do not complete the remaining steps. If the issue is not resolved, go to the next step.
6. Note: The Command.com file is not edited or created in this in the following process. Because of this, you may have to expand it from your Windows XP CD-ROM.
Start Notepad.
7. In Notepad, type the following entries:
dos=high, umb
device=%SYSTEMROOT%\system32\himem.sys
files=40
8. On the File menu, click Save As.
9. In the File Name box, type Config.nt, and then click Save. Close the Config.nt file.
10. On the File menu, click New.
11. In the new blank document, type the following entries:
@echo off
lh %SYSTEMROOT%\system32\mscdexnt.exe
lh %SYSTEMROOT%\system32\redir
lh %SYSTEMROOT%\system32\dosx
SET BLASTER=A220 I5 D1 P330 T3
12. On the File menu, click Save As.
13. In the File Name box, type Autoexec.nt, and then click Save. Close the Autoexec.nt file.
14. Start Windows Explorer. Locate the Config.nt file, right-click the Config.nt file, and then click Copy.
15. Right-click the %SYSTEMROOT%\System32 folder, and then click Paste.
16. Locate the Autoexec.nt file, right-click the Autoexec.nt file, and then click Copy.
17. Right-click the %SYSTEMROOT%\System32 folder, and then click Paste.
18. Locate the Command.com file, right-click the expanded Command.com file, and then click Copy.
19. Right-click the %SYSTEMROOT%\System32 folder, and then click Paste. Restart your computer."